A Motorcycle Helmet Lights is a key to your safety on the road. Aside from protecting your head during a collision, it can also help prevent that collision from occurring by using a motorcycle helmet lights and reflective stickers. Motorcycle Helmet Lights and reflective stickers increase your visibility at night when making lane changes and hitting the brakes at night or dim-light conditions.

Finding the right motorcycle helmet lights and reflective stickers might be slightly overwhelming, with all the many brands available on the market today. Fortunately for you, we’ve done all the legwork and reviewed nine of the best motorcycle helmet lights and reflective stickers. We also provide a buying guide to help you make the right purchase decision of buying the right lights or labels for your motorcycle helmet in German Helmets.

Motorcycle Helmet Lights

Top 10 Motorcycle Helmet Light BrandsTo Buy

Bestseller No. 4
2in1 Night Riding Signal EL Light for Bicycle Motorcycle - Motorbike Turn Signal Cold Light Strip Bike Light Accessories(Blue)
UNIVERSSAL FIT :This product is universal for all kinds of motorcycles in the market.
$17.99
Bestseller No. 5
SaleBestseller No. 6
JahyShow 2in1 Night Riding Signal EL Light for Bicycle Motorcycle - Motorbike Turn Signal Cold Light Strip Bike Light Accessories Blue
【UNIVERSSAL FIT】This product is universal for all kinds of motorcycles in the market.
$12.99
Bestseller No. 8
Oxbow Gear Voyager Dirt Bike Helmet Light Kit with Rechargeable Battery, Compatible with GoPro Mounts, 2100 Lumens, 3 Hours on High Beam
Storage Case Included - Keep your light kit organized and ready to use in your backpack.
$99.00
Bestseller No. 9
Triangle Full Face Lightweight, Aerodynamic, Comfortable Street Bike Motorcycle Helmets DOT Approved (Large, Indian Blue)
Full Face Helmet. DOT Approved.; Advanced ABS shell with high pressure thermoplastic technology.
$55.95

1. Motorcycle Helmet Light Strip LED Night Signal

Description:

  • The turn signal light is attached to a motorcycle helmet for warning effect
  • Which is quite obvious especially in foggy, rainy, or snowy weather, or at night or in a dark environment, thereby effectively preventing rear-end collisions and ensuring driver’s safety
  • This product is universal for all kinds of motorcycles in the market
  • With a waterproof design, the product can not be easily destroyed
  • 20 minutes of battery life per day for one month (excluding battery)
  • The service life is 5000 hours
  • Flashing, always-on, warning three-stop mode

Specification:

  • Product Type: Motorcycle Helmet Turn Signal Light
  • EL thickness: 2mm
  • EL Weight: 0.5g
  • EL Size: 380*35(mm)
  • EL power source: 3V

Fitment:

  • Suitable for all type of motorcycle
  • Package Included:
  • 1 X Pair Helmet LED Strip Light

2. Kuryakyn 2801 Motorcycle Lighting

Prism+ Impact LED Light Kit with Bluetooth Controller, Universal Fit for 12V Application.

The Kraken 2801 Prism+ Impact LED light kit provides distinct LED accent lighting personalized by you! Our robust Prism+ system is loaded with a variety of ways to turn your ride into a rolling canvas of light, all controlled by your phone via Bluetooth. Free and downloadable app features device microphone recognition for music syncing capability, camera recognition for convenient photo color referencing, battery voltage monitor, and auto shut-off to prevent overconsumption; 5 Modes of lighting: ride, rage, chase, chill, and custom. The smart L. E. D. s are also capable of practical features like additional run, brake, and turn signal functionality to greatly improve visibility toward other motorists. This “mid-level” Prism+ kit includes more than enough firepower to make a serious impact regardless of what you ride. Constructed with durable IP67 rated waterproof housings and connectors. Easy installation with plug-&-play “daisy chain” expansion: sealed housings and connectors can only be assembled one way to eliminate miss-wiring. Includes (1) Bluetooth controller, (6) light pods, (2) 8″ Alex-stips, (8) 9″ extension cords, (4) 12″ extension cords, (2) 24″ extension cords, (4) loop connectors, and (1) hardware kit; suggested for installation (not included): Philips screwdriver, wire crimper, electrical tape, masking tape, clean rag, and warm soapy water. The Kraken 2801 Prism+ Impact LED light kit is a universal fit for 12V applications; optional brake/rear turn functionality not compatible with all years, makes, and models.

Rider safety depends on being seen from all directions:

You expect your helmet to provide protection during a collision. What if your helmet also helped prevent that collision from happening?

Riders often worry about getting hit from behind. But that happens less than 10% of the time in a collision with another vehicle. Motorcycle headlights are used night and day but have a limited impact on drivers ahead because the lights are too low to appear in those drivers’ rear views. If a motorist decides to change lanes while a rider is making that lane change, the outcome could be deadly.

At your highest point when you ride, your helmet is the most visible object that motorists can see. LightRider takes advantage of your helmet’s potential for added protection by surrounding it and you in a very bright field of light.

Designed for Maximum Usability:

  • Fits full face, open face, modular, half, and motocross helmets.
  • 360° beam is visible up to 600 feet.
  • No backlight shines into the rider’s eyes.
  • The added helmet weight is only 1.3 ounces.
  • The coiled power cord stretches to the rider’s height.
  • The adhesive bond to the helmet is ‘non-solvent’ to protect the helmet’s warranty.
  • Flexible joints enable different LED layout patterns.
  • The low operating temperature of -10°F.

4. Amator Helmet Lighting System

This is a wireless 8 LED strip that attaches onto the back of a motorcycle helmet. It is waterproof and can be mounted on almost any type of helmet

The two yellow LEDs on the left act as left turn indicators, the four red LEDs in the center act as brake lights while the two yellow lights on the right are right to turn indicators.

The device uses 2.4G technology to transmit and receive signals

The package comes with a user manual, a screwdriver, two screws, an emitter, and the 8 LED strip

The device is powered by two AAA batteries but these aren’t included in the package. You’ll need to purchase them separately

Installation and code-matching is explained in the user manual – the LED strip has a self-adhesive pad that glues on to the helmet

Pros:

  • This product has several functions such as turn indicators, brake lights etc.
  • It is waterproof and hence useful in rain and snow.
  • Many lights are not water-proof – they need to be turned off in the rain and allowed to dry completely before switching them on again.

Cons:

  • The lights, although bright, look kind of cheap and old school.
  • The low cost raises doubts over the overall build quality of the product.

5. JahyShow Motorcycle Helmet Night Riding LED Light

Motorcycle Helmet Lights
The turn signal light is mounted on the motorcycle helmet and has a warning effect, especially in foggy weather, rainy or snowy weather, and is very obvious at night or in dark environments, thus effectively preventing rear-end collision and ensuring driver’s safety

Description:

  • 100% Brand New and High Quality
  • Type: Motorcycle Helmet DIY Light Stripe Sticker
  • Color: Blue, Red, Purple —3 Modes: Always On, Slow Flash, Fast Flash. Can be switched via the controller.
  • Universal Suitable for all kinds of motorcycles.
  • Waterproof
  • Low power consumption
  • Double-sided tape, easy to clean after peeling
  • Power Supply: 2 * AA Battery(Not Included)
  • Service Life: 5000 hours
  • Length:15.74inch/40cm

Package Includes:

  • 1 Pair Helmet Light Strip
  • 1 x Extension Wire
  • 1 x Connecting Wire Harness
  • 1 x Controller(Battery Not included)

Rider safety depends on being seen from all directions.

You expect your helmet to provide protection during a collision. What if your helmet also helped prevent that collision from happening?

Riders often worry about getting hit from behind. But that happens less than 10% of the time in a collision with another vehicle. Motorcycle headlights are used night and day but have a limited impact on drivers ahead because the lights are too low to appear in those drivers’ rear views. If a motorist decides to change lanes while a rider is making that lane change, the outcome could be deadly.

At your highest point when you ride, your helmet is the most visible object that motorists can see. LightRider takes advantage of your helmet’s potential for added protection by surrounding it and you in a very bright field of light.

Designed for Maximum Usability:

  • Fits full face, open face, modular, half, and motocross helmets
  • 360° beam is visible up to 600 feet
  • No backlight shines into the rider’s eyes
  • Added helmet weight is only 1.3 ounces
  • Coiled power cord stretches to rider’s height
  • Adhesive bond to the helmet is ‘non-solvent’ to protect helmet’s warranty
  • Flexible joints enable different LED layout patterns
  • The low operating temperature of -10°F

7. India Motorcycle Helmet Light led Helmet Sticker EL Strip (Blue)

Motorcycle Flash Helmet Safety Light Stripe Sticker:

  • Universal Helmet Fits
  • Also Can be DIY at any surface you would like to decor or warn.(Skiing Helmet/Child Bike Helmet/Skates Helmet etc)
  • 3 Modes: Always On/Slow Flash/Fast Flash. Mode Changes via the controller
  • Double-sided Adhesive, Easy to Clean after Peeling Off
  • Battery Powered (Excluded). Low power consumption
  • Waterproof Design, Corrosion-Resistant

Extremely Light Weight:

  • The EL helmet lights are in extremely lightweight, you can barely feel it after sticking on the helmet

Waterproof & Anti-Corrosion Performance:

  • Has long service life under normal temperature, with waterproof design, great anti-corrosion performance is ideal for outdoor and sport use

8.Motorcycle Helmet Light, Cold Light Helmet Stickers Night

Feature:

  • 3 Modes: Always On, Flash, Fase Flash. Can be switched via the controller.
  • 3M double-sided adhesive, easy to clean after peeling off.
  • This product is universal for all kinds of motorcycles in the market. With a waterproof design, the product can not be easily corroded.

Specification:

  • Color: Ice blue, Blue, Yellow, Green, Pink, Yellow
  • Power Supply: 2 x AA Battery(Not Included)
  • Service Life: 5000 hours

9. B REFLECTIVE

This B REFLECTIVE kit is composed of 10 reflective stickers 7 x 1.8 cm (2.75 x 0.7″).

Attractive and discreet by daylight on a black or dark item. they will make it more visible in the dark or under the rain on the road.

Stick them on any kind of helmet motorbikes, scooters, bikes, baby strollers, buggy, child toys…

This product can be a motorbike helmet accessory designed to increase safety and visibility. it doesn’t go against the Safety Standard FMVSS218.

Every B REFLECTIVE sticker has been tested to meet the technical requirements of motorbike. cycle and all other users. To quickly test and check a B REFLECTIVE reflective product effectiveness. step back about 2 meters from it and take a photo without then with flash!

Made in France by B REFLECTIVE: giving visibility accessible to everybody.

10.Rider Gadgets Wireless Helmet Brake Light

Wireless helmet brake light. The applied patent in 2009, approved and got patent on April 26, 2011, from USPTO… Wireless Helmet Brake Light has one (1) transmitter and one (1) TPR – (ECO-Friendly, recyclable materials) 18-LEDs receiver(Stripe). the transmitter has 12-LED light bulbs. The TPR receiver has 18-LED light bulbs. The receiver is soft and bendable enough to fit any surface on a helmet, jacket, trunk, saddlebags, etc. Use the transmitter to replace your old brake light unit. When the rider applies the brake light, the brake light unit will send a signal to the TPR receiver. The TPR receiver will light up to ensure the safety of the rider even in severe weather conditions. A rider may have as many receivers as he/she wishes. The receiver can and will turn off the power automatically if the rider fails to apply the brake after two hours to save energy. Finally, it has a low power indicator at the on/off button that will flash to warn the rider to replace the battery. The TPR receiver in the helmet is so bright that it can be seen clearly in the daylight-like 3rd brake light in a passenger car. Right now only two-wire transmitter is available. This transmitter will work for every bike in this world. Enjoy your ride all year long. Your safety is our priority. Will ship in 24 hours. This product has two US patents along with FCC and CE approved certificates.

How does EL wire work?

EL wire is layered with a phosphor that is also wrapped with a very thin wire that is made up of copper wire.

The wire is protected by a layer of PVC sheathing, and another PVC sheathe is used to color the light that the wire produces.

Once an alternating current is applied to The core and also The wrapping wire, it then excites the thin layer of phosphor that separates The two, which in result causes it to glow brightly.

See more >> Best Led motorcycle helmet

What can I make?

EL wire is almost a miracle when you look at it because it is so simple, that you can pretty much slap it on anything. Yes, that means you can sew it into your clothes, and go full Tron Guy. There are many more subdues uses for it as well.

For instance, you can line a bag with EL wire, wrap The handlebars or top tube of a bicycle. You simply tuck the wire into the corners of a small box or container, a drawer, a display case, or even The engine compartment of your car. Personal experiences have taught me that you can also make the cat wear using EL wire sort of like a collar, but my cat does not like it.
If you want to get just a bit more technical, you can hook multiple strands of EL wire up to a sequencer, which is a microcontroller that turns All The strand on and off according to a program.

If you enjoy the smooth look of EL wire, but you find that it is too wiry, be aware that you can also buy EL tape or EL panel. Both of these work The same way as the EL wire and provide The same continuous, even The illumination. The only difference is that EL tape does come in a thick flat band, and the EL panel is sold in 10cm x 10cm squares. Like EL wire, they both can be cut down to a certain shape or size, for what you are working on.

Conclusion:

Motorcycle helmet lights are a blessing in poor weather. They help in enhancing the safety and aesthetic appeal of helmets.

Consider lighting up your helmet – especially if you live in areas where visibility is often poor and/or do a considerable amount of riding at night time.